Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine air filter of the Citroen Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

To safely replace the air filter of the engine of your second series Peugeot Boxer, you must follow all of the following steps. Start by making sure the vehicle is completely turned off and that the engine is not yet hot. Immediately after, proceed to open the front hood and then locate the box containing the air filter to be replaced, which is located on the right side of the engine compartment.

Once you have located it, remove the safety clips and then lift the cover. Finally, replace the old air filter with a new one that is perfectly compatible.


Posted on 31 August 2025 by ScegliAuto


Related tutorials

Replacing Air Filter on Citroen Jumper
Replacing Air Filter on Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) How to remove the air filter from a Citroen Jumper? Let’s look at removing the filter located in the engine bay. Lift the front bonnet of the Jumper,…
How to Replace the Cabin Air Filter on a Citroen Jumper
How to Replace the Cabin Air Filter on a Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) If you want to independently replace the cabin air filter in your Citroen Jumper but don't know how to perform the operation, follow the steps descri…
How to Replace the Air Filter of the Citroen Jumper
How to Replace the Air Filter of the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) Replacing the air filter in the Citroen Jumper takes only a few minutes and can be easily done by anyone without the help of an experienced mechanic.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos