Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter of the Citroen Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

Replacing the air filter in the Citroen Jumper takes only a few minutes and can be easily done by anyone without the help of an experienced mechanic. Before you begin, ensure the engine is off and has cooled down for safe operation.

Then, lift the bonnet and remove the plastic cover that conceals the upper part of the engine bay. Once done, locate the filter box and completely pull it out. Replace the old filter with a new one, and finally, refit the box in its original position.

At this point, simply reattach the plastic cover of the engine, and you are finished.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

Replacing Air Filter on Citroen Jumper
Replacing Air Filter on Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) How to remove the air filter from a Citroen Jumper? Let’s look at removing the filter located in the engine bay. Lift the front bonnet of the Jumper,…
How to Replace the Cabin Air Filter on a Citroen Jumper
How to Replace the Cabin Air Filter on a Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) If you want to independently replace the cabin air filter in your Citroen Jumper but don't know how to perform the operation, follow the steps descri…
How to replace the engine air filter of the Citroen Jumper
How to replace the engine air filter of the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) To safely replace the air filter of the engine of your second series Peugeot Boxer, you must follow all of the following steps. Start by making sure …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos