Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Centre Display on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Instrument cluster

In today's video, you will see how to remove the central LCD display on the first series Citroen C3. Detach the plastic trim surrounding the monitor. Then, remove the screws using a T20 Torx screwdriver. Now you can extract the display by disconnecting the power connector. Remove the blown bulb and replace it with a new one of the same type. Finally, reassemble everything following the previous steps and check its proper functioning before screwing in the screws and reinserting the plastic trim.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Central Display of the Citroen C3
How to Set the Time on the Central Display of the Citroen C3
Citroen C3 (2016-2023 / SY, SX) Today, we will see the instructions that will allow you to set the time on the central display of the Citroen C3. First, get inside the vehicle and s…
How to change the time on the Citroen C3
How to change the time on the Citroen C3
Citroen C3 (2016-2023 / SY, SX) Following these short and simple steps, we will see how to change the time on the central display of the Citroen C3. First of all, we get into the ca…
How do you set the clock on the Citroën C3?
How do you set the clock on the Citroën C3?
Citroen C3 (2002-2009 / FC, FN) On board the Citroën C3, the clock that appears on the central display of the dashboard can be modified by rotating the key to turn on the instrument…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos