Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the timetable on the Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Clock

The time indication on this car is present on the display at the top of the central tunnel and in order to change the time it is necessary to proceed as follows: access the passenger compartment and sit in the driver's seat, insert the ignition key and turn on the ignition. Locate the "menu" command among the various car radio controls, press this command until the time appears, at which point press the "ok" command on the car radio to change the time by scrolling it with the commands arrow "up" and down "Save the new hour with" ok "and repeat the same procedure to change the minutes.

Posted on 13 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to change the time on the Citroen C3 2024
How to change the time on the Citroen C3 2024
Citroen C3 (2024-2026 / Cc21) In the following procedure you will find the description of all the steps you need to follow if you intend to manually change the system time display…
How to set the time on the Citroen C3
How to set the time on the Citroen C3
Citroen C3 (2016-2023 / SY, SX) To set the clock using the car's multimedia system, it is necessary to follow the simple steps below: First of all turn on the panel then on the touc…
How to change the time on a Citroen C3
How to change the time on a Citroen C3
Citroen C3 (2009-2016 / SC) Let's see in this short video tutorial how to change the time on a second-generation Citroen C3, model produced from 2009 to 2016. Well, to start, we…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos