Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Citroen C4 Grand Picasso?

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Warning light – error code

After performing the required service operations on the vehicle, reset the service light by following these steps: sit in the driver's seat and insert the key into the ignition. Locate the button on the central display on the right side that you need to press and hold, then simultaneously turn on the engine. A countdown will start on the display, and at the end of this countdown, the service light will be reset. You can then turn off the engine and restart it to check that the light has turned off correctly.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Citroen C4 Grand Picasso?
How to Reset the Service Light on a Citroen C4 Grand Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) As shown in this tutorial, resetting the service light on a Citroen C4 Grand Picasso is a very simple and quick operation. Before proceeding, ensure …
How to Reset the Service Light on a Citroen C4 Grand Picasso
How to Reset the Service Light on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) This video demonstrates how to reset the service light on a Citroen C4 Grand Picasso with a digital instrument panel and buttons on the dashboard: tu…
Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) This guide shows the procedure to dismantle the airbag switch and module on the second series Citroen C4 Grand Picasso. First, get into the vehicle a…

Other guides you may be interested in

    Frequently Asked Questions

    • C4 Picasso 2013-2022 - What does the engine failure warning light in the instrument cluster of a Citroen C4 Picasso mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos