Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara
    4. : Changing spark plugs on a Citroen Xsara

Citroen Xsara - Video tutorial

Model: Citroen Xsara MK 1 - Years 1997-2006
Part: Spark plugs
Operation: Changing spark plugs on a Citroen Xsara

Replacing the spark plugs in a Citroen Xsara is easy. Let's start by unscrewing the protection that covers the engine. We remove the two clips located on the motor body. We unscrew the four screws that hold the cover on the spark plugs, remove the plugs. With a T wrench with 16 mm socket we unscrew the four spark plugs from their housing. With the same key we reposition the candles, making sure they don't fall while we position them. Put the cover over the spark plugs back in its place, close it with its 4 screws, put the two clips back in place and screw the engine compartment cover back on. The job is done.


Posted on 12 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Xsara 1997-2006 - Where are the spark plugs in the Citroen Xsara Break? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos