Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rocker Cover Gasket

Model: Citroen Xsara MK 1 - Years 1997-2006
Part: Engine

Before applying the new gasket, thoroughly clean its seating area, both on the cylinder head side and under the cover itself: cleaning is very important to ensure perfect adhesion and sealing of the gaskets. Once cleaning is complete, insert the gaskets into the grooves along the edges of the covers, then position them on the cylinder head (without applying gasket sealant) and tighten the fixing bolts in a criss-cross pattern using a torque wrench to ensure even gasket adhesion. After installation, check for any leaks.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cylinder Head Resurfacing and Engine Gasket Kit Replacement
Cylinder Head Resurfacing and Engine Gasket Kit Replacement
Citroen Xsara (1997-2006 / MK 1) After resurfacing the cylinder head, check the flatness of the surface using a straight edge and a feeler gauge; repeat the same check on the cylinde…
Replacing the Exhaust Manifold Gasket
Replacing the Exhaust Manifold Gasket
Citroen Xsara (1997-2006 / MK 1) Before applying the new gasket, it is absolutely essential to clean the gasket seating area thoroughly, both on the cylinder head side and the manifo…
Intake Manifold Gasket Replacement
Intake Manifold Gasket Replacement
Citroen Xsara (1997-2006 / MK 1) The intake manifold gasket consists of four rubber rings that must be placed in their respective grooves corresponding to the intake ports; once the …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos