Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Exhaust Manifold Gasket

Model: Citroen Xsara MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine

Video tutorial

Before applying the new gasket, it is absolutely essential to clean the gasket seating area thoroughly, both on the cylinder head side and the manifold side, removing any dirt and deposits. This ensures perfect adhesion of the gasket and guarantees a proper seal.

Once the cleaning is complete, insert the new gasket aligning it with the dowel pins, then apply the manifold and tighten the fixing nuts using a torque wrench and a cross-tightening pattern. The gasket is made of metal, and there is no need to apply gasket sealant.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Cylinder Head Resurfacing and Engine Gasket Kit Replacement
Cylinder Head Resurfacing and Engine Gasket Kit Replacement
Citroen Xsara (1997-2006 / MK 1) After resurfacing the cylinder head, check the flatness of the surface using a straight edge and a feeler gauge; repeat the same check on the cylinde…
Intake Manifold Gasket Replacement
Intake Manifold Gasket Replacement
Citroen Xsara (1997-2006 / MK 1) The intake manifold gasket consists of four rubber rings that must be placed in their respective grooves corresponding to the intake ports; once the …
Replacement of Rocker Cover Gasket
Replacement of Rocker Cover Gasket
Citroen Xsara (1997-2006 / MK 1) Before applying the new gasket, thoroughly clean its seating area, both on the cylinder head side and under the cover itself: cleaning is very import…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos