Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Valve Guide Cup Replacement

Model: Citroen Xsara MK 1 - Years 1997-2006
Part: Engine

When overhauling an engine, it is advisable to replace all those components generally subject to wear, such as the valve guide cups and possibly the corresponding camshafts; once the installation of the cylinder head is complete, lubricate the seats of the cups and insert the new ones, then position the camshafts after thoroughly lubricating the rolling seats; apply gasket sealant before installing the bracket that secures the camshafts; then insert the side oil seals with the lip facing inwards, install the timing pulleys, align the timing marks, and also fit the belt.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses on the Citroen Xsara
Where to Find the Fuses on the Citroen Xsara
Citroen Xsara (1997-2006 / MK 1) To replace the fuses on the Citroen Xsara inside the cabin, go to the left of the steering wheel, where there is a small cover under the mirror adjus…
Replacement of Cylinder Head Fixing Pins
Replacement of Cylinder Head Fixing Pins
Citroen Xsara (1997-2006 / MK 1) When replacing the cylinder head gasket, it is good practice to also replace the corresponding fixing pins; however, before installation, re-thread t…
Replacement of Valve Guide Seals
Replacement of Valve Guide Seals
Citroen Xsara (1997-2006 / MK 1) Replacing the valve guide seals is a relatively simple task, but you need the right tools: a suitably shaped arch clamp is required to compress the v…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos