Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Service warning light

After performing regular maintenance by replacing the engine oil and its filter, reset the service light on the instrument panel manually using the trip reset button (located on the right side of the instrument panel, marked ODO) without the need for diagnostic tools:
- with the ignition off, press the trip reset button;
- while holding the button, turn on the ignition;
- wait for the countdown to finish;
- turn off the ignition;
at this point, the reset is complete.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Citroen C3
How to reset the service light on the Citroen C3
Citroen C3 (2016-2023 / SY, SX) The reset of the service light on the Citroen C3 vehicle follows the same procedure as resetting the light related to the maintenance of Peugeot vehi…
How to Reset the Service Light on a 2009 Citroen C3
How to Reset the Service Light on a 2009 Citroen C3
Citroen C3 (2002-2009 / FC, FN) Resetting the service light related to the service interval on a Citroen C3 vehicle follows very simple and quick steps that can be done independentl…
How to Reset the Service Light on a Citroen C3
How to Reset the Service Light on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) Today, you will learn the steps to reset the service light on the Citroen C3. To reset, press the button with the spanner symbol on the instrument pa…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What does the illumination of the Service warning light mean in the Citroen C3? Read answer
    • C3 2002-2009 - How to reset the "Service" warning light on a Citroen C3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos