Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the number plate lights on the Citroën C3

Model: Citroen C3 SC - Years 2009-2016
Part: License plate light

Today's guide will show you the steps to remove and replace the number plate bulbs on the Citroën C3. First, move to the rear of the vehicle and start prising off the plastic light cover using something thin and pointed to remove it; then, take out the small bulb by removing it from the holder, as shown in the video. At this point, install the new number plate light with the same fitting; reattach the number plate light cover and perform the same operation to replace the other bulb!

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the license plate light of the Citroen C3
How to replace the license plate light of the Citroen C3
Citroen C3 (2016-2023 / SY, SX) Today we will explain how to replace the license plate light on a Citroen C3 car. To perform this operation, we will need a flat tip screwdriver and …
How do you replace the license plate light of the Citroen C3?
How do you replace the license plate light of the Citroen C3?
Citroen C3 (2002-2009 / FC, FN) One of the most important lights on your car is definitely the license plate light, which should not be neglected if it is burned out. Here we are ta…
Replacing Number Plate Lights on Citroen C3
Replacing Number Plate Lights on Citroen C3
Citroen C3 (2002-2009 / FC, FN) Are the number plate bulbs on your C3 blown? Here's how to change them. Using a screwdriver, remove the transparent light unit for the number plate l…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos