Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4 Picasso
    4. : Replacement of the cabin air filter of the Citroen C4 Picasso.

Citroen C4 Picasso - Video tutorial

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Cabin air filter
Operation: Replacement of the cabin air filter of the Citroen C4 Picasso.

Let's see how to proceed to replace the cabin air filter of the Citroen C4 Picasso. We open the glove compartment in front of the front passenger seat, we remove the dashboard panel on the right, also removing the electrical connector and unscrewing the screw. We move to the end of the central tunnel by unscrewing the screws and removing the side panels on both sides, we unscrew the two screws and remove the front piece. With the appropriate tool, we remove the three pressure pins and remove the panel under the glove compartment, also sliding out the electrical connector. With a plastic lever, we remove the frames of the buttons and the central compartment, we open the glove compartment and unscrew the three screws on the upper frame and the two on the sides: we can then remove the compartment after removing the interior lamp and all other connections. This way, we have access to the cover of the removed filter, which we can remove the two filter elements and replace them with two new ones. We close the cover and reassemble all the pieces by proceeding in reverse with the operations.


Posted on 18 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C4 Picasso 2013-2022 - Where is the cabin filter of the Citroen C4 Picasso? Read Answer
    • C4 Picasso 2013-2022 - Where is the Citroen C4 Grand Picasso pollen filter located? Read Answer
    • C4 Picasso 2006-2013 - Where is the cabin air filter of the 2007 Citroen C4 Picasso? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos