Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroën C4 Aircross

Model: Citroen C4 Aircross MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

Video tutorial

To reset the Service light on a Citroën C4 Aircross, press and hold the reset button located at the bottom left of the instrument panel, next to the steering column. While holding this button, insert the ignition key into the lock and turn it to switch on the dashboard.

You will notice that the Service light will start to flash and after a few seconds, it will turn off. At the end of the procedure, you can turn off the instrument panel by turning the ignition key back.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Citroën C4 Aircross
How to reset the service light on the Citroën C4 Aircross
Citroen C4 Aircross (2012-2017 / MK 1) .. The following video tutorial shows us how to reset the service light on a Citroën C4 Aircross. To reset it, you need to get into the vehicle .. …
How to reset the service of the Citroen C4 Aircross
How to reset the service of the Citroen C4 Aircross
Citroen C4 Aircross (2012-2017 / MK 1) In this video we see how to reset the service light of the Citroen C4 Aircross: when we get into the car, we must make sure that all four doors, the …
How to reset the TPMS warning light on the Citroen C4 Aircross
How to reset the TPMS warning light on the Citroen C4 Aircross
Citroen C4 Aircross (2012-2017 / MK 1) Today we will explain how to reset the tire pressure warning light on a Citroen C4 Aircross car. To reset the warning light after adjusting the tire …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos