Do it yourself
| ||||
|
Citroen C4 Aircross - Video tutorial
Model: Citroen C4 Aircross
MK 1
- Years 2012-2017 If you want to find the OBD port inside your 2016 Citroen C4 Aircross on your own, just follow these simple steps. First of all, go inside the car and make sure it is completely turned off, then get a common small flathead screwdriver and use it to remove the plastic panel located below the air conditioning buttons. Once you have done that, you will finally have access to the OBD port and you can then connect any diagnostic tool compatible with the car to it.
Posted on 8 March 2024 by ScegliAuto
Other guides that may interest you
|
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |