Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to re-synchronize a Citroen key

Model: Citroen Citroen Various
Part: Key

In this video we see how to re-synchronize a key of a Citroen car. This key works perfectly if used in the lock, but no longer works as a remote control. Our youtuber shows us how it is possible to synchronize it again in a very simple way. We enter the car and put the key in the ignition. We turn it, but not to start the engine, just to turn on the ignition; at the same time we hold down the lock button for at least ten seconds. Then we put the key back in the "OFF" position, still holding the button down, and remove the key. Let's do a test. Now the remote control will work.

Posted on 2 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to set the display from kilometers to miles on a Citroen vehicle
How to set the display from kilometers to miles on a Citroen vehicle
Citroen Citroen Various Today we will explain how simple and quick it is to replace the display of kilometers with miles on a Citroen vehicle. To perform this operation, we …
Replacing the Key Shell for Citroen
Replacing the Key Shell for Citroen
Citroen Citroen Various Replacing the key shell of a Citroen? Disassemble the key and replace the cover. Take the key and press the release button. Once the metal key pops o…
How to Programme a Citroën Key?
How to Programme a Citroën Key?
Citroen Citroen Various To programme a Citroën key, insert the ignition key into the ignition barrel so that it can be recognised. Once the key is inserted, connect the diag…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos