Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulb on a Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fog lights

See other generations:
Video tutorial

These brief steps will show you how to remove and replace the front fog light bulb on a Citroen C4 Picasso and C4 Grand Picasso. First, move to the front of the vehicle and start by removing the plastic cover of the fog light; then unscrew the fixing screws of the lamp found on the sides to remove it, as shown in the video.

At this point, disconnect the electrical connector of the fog light bulb to remove it and replace it with a new one of the same fitting; check the operation and refit the lamp and the plastic cover.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Removing Fog Light and Replacing Bulb on Citroen Grand C4 Picasso
Removing Fog Light and Replacing Bulb on Citroen Grand C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In this video, we will see how to remove the headlight and replace the bulb of the front fog light on the Citroen C4 Grand Picasso. First, we will ne…
How to Replace the Front Indicator Bulb on a Citroen C4 Picasso
How to Replace the Front Indicator Bulb on a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Follow the procedure to remove and replace the front indicator bulb of the Citroen C4 Picasso and Grand Picasso. First, open the bonnet of the vehicl…
How do you replace a light bulb in the Citroen C4 Picasso?
How do you replace a light bulb in the Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) It is important to keep all the bulbs of the headlights, both front and rear, of your car efficient. Let's go into detail about the Citroen C4 Picass…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos