Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cupra
    3. :
  3. Cupra Formentor
    4. : Checks and maintenance

Cupra Formentor - Checks and maintenance

Checks And Maintenance Cupra Formentor (2020-2027 / mk 1)

Cupra Formentor (2020-2026 / MK 1)
Tire pressure reset for the Cupra Formentor
In today's video, we are shown how to reset the tire pressure of a Cupra Formentor. We start the reset procedure by turning on the car's instrument panel and …Read all…
Posted on 11 March 2025 by ScegliAuto
Cupra Formentor (2020-2026 / MK 1)
How do you reset the partial odometer of the Cupra Formentor?
In order to reset the partial odometer of the Cupra Formentor, you need to turn on the instrument panel so that you can navigate through the menu on the …Read all…
Posted on 15 January 2025 by ScegliAuto
Cupra Formentor (2020-2026 / MK 1)
How do you reset the partial odometer of the Cupra Formentor?
To reset the partial odometer of the Cupra Formentor, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: then …Read all…
Posted on 30 October 2024 by ScegliAuto
Cupra Formentor (2020-2026 / MK 1)
How to Carpet the Interior of the Doors and Glove Compartment of the Cupra Formentor?
Another interesting DIY video concerning the Cupra Formentor, this time focused on the cabin spaces, specifically the inner door panels and the glove …Read all…
Posted on 15 September 2026 by ScegliAuto
Cupra Formentor (2020-2026 / MK 1)
How to Install a Second Courtesy Light in the Boot of the Cupra Formentor?
This video demonstrates how to increase the brightness of the boot area by installing a second light in the designated fitting. After confirming the light is …Read all…
Posted on 15 September 2026 by ScegliAuto
Cupra Formentor (2020-2026 / MK 1)
How to Activate the Vehicle Open Warning Sound on the Cupra Formentor
In this video, you will see how to activate the sound for opening the Cupra Formentor. This can be very handy when parking the vehicle in a large space, …Read all…
Posted on 11 September 2026 by ScegliAuto
Battery (2) Body (1) Key (15) Onboard computer (2) Checks and maintenance (6) Cabin air filter (2) Handle (1) Clock (2) Door trim panel (1) Instrument cluster (2) Fuse box (10) Seat (2) AdBlue warning light (1) Warning light – error code (1) (6) Tire pressure warning light (2) Service warning light (20) Windshield wipers (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos