Do it yourself
| ||||
|
Cupra Formentor - Video tutorial
Model: Cupra Formentor
MK 1
- Years 2020-2024 Another very interesting DIY video, concerning the Cupra Formentor, this time dedicated to the interior spaces, specifically the inner door panels and the dashboard glove compartment. The video shows and comments on how to carry out the aforementioned work, using carpeting already cut to size for the areas to be covered. In the package, in fact, there is also a sort of guide that explains step by step where to install each piece of the aforementioned carpeting. After placing each cutout on the area of interest and doing an initial test of how it will look, you can proceed to remove the backing film and glue everything down.
Posted on 23 February 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |