Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Panel of a Cupra Formentor

Model: Cupra Formentor
Part: Body

To remove the interior panel of a Cupra Formentor, lift the cover where the window switch button is located, and remove the two-piece ring that holds the upper and lower handle together. Below, you will find two Torx screws of 25 mm. Remove the electrical connector and then lift the entire outer perimeter of the panel, which is clipped in, using a plastic spatula to avoid damage. The clips at the top are sliding, so lift slightly to allow them to come out. Then disconnect three connectors, plus the wire that opens the handle.

Updated on 15 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you remove the front outer handle of a Cupra Formentor?
How do you remove the front outer handle of a Cupra Formentor?
Cupra Formentor (2020-2026 / MK 1) In this video, we see how to remove the external front handle of a Cupra Formentor: we open the door, and we notice two small holes in the thickness.…
How to remove the door panel on the Cupra Formentor
How to remove the door panel on the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) Today we will explain how to remove the door panel of the Cupra Formentor and install a LED strip inside. We start by removing the panel by removing …
How do you reset the partial odometer of the Cupra Formentor?
How do you reset the partial odometer of the Cupra Formentor?
Cupra Formentor (2020-2026 / MK 1) To reset the partial odometer of the Cupra Formentor, you need to turn on the instrument panel by inserting the ignition key into the corresponding s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos