Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate the Vehicle Open Warning Sound on the Cupra Formentor

Model: Cupra Formentor MK 1 - Years 2020-2026
Part: Checks and maintenance

In this video, you will see how to activate the sound for opening the Cupra Formentor. This can be very handy when parking the vehicle in a large space, especially if it is poorly lit and surrounded by many other cars, as it helps you locate it easily; the sound comes from the alarm siren and is not too loud, activating only upon opening. Let's see how to enable this feature. First, turn on the instrument cluster, then from the infotainment screen go to "settings", select "external", then "central locking". Next, select "confirmation sound" and activate it.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the seat belt buzzer of the Cupra Formentor
How to deactivate the seat belt buzzer of the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) Disabling the seat belt warning signal on a Cupra Formentor vehicle is a simple and quick operation to be carried out independently. Just turn on the…
How to activate the heated seats mode in the Cupra Formentor
How to activate the heated seats mode in the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) Today we will explain how to activate the heated seats mode on a Cupra Formentor. To activate this mode, we must start the vehicle's instrument panel…
How to Reset the Tyre Pressure Light on a Cupra Formentor
How to Reset the Tyre Pressure Light on a Cupra Formentor
Cupra Formentor In this brief and simple video tutorial, learn how to reset the tyre pressure on a Cupra Formentor. Start by pressing the ignition button to turn on …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos