Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the seat belt buzzer of the Cupra Formentor

Model: Cupra Formentor MK 1 - Years 2020-2026
Part: Onboard computer

Disabling the seat belt warning signal on a Cupra Formentor vehicle is a simple and quick operation to be carried out independently. Just turn on the dashboard of the car and select the voice related to the settings from the onboard computer. From the settings menu, we must select the general values and then select the voice "ADJUSTMENT" and "DISABLE WARNING". Select "SEAT BELT ALARM" and select "OFF". Once the voice is disabled, you will no longer hear the beep when starting the engine and driving off. To reactivate the system, you will need to perform the same actions but select "ON".

Posted on 24 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Activate the Vehicle Open Warning Sound on the Cupra Formentor
How to Activate the Vehicle Open Warning Sound on the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) In this video, you will see how to activate the sound for opening the Cupra Formentor. This can be very handy when parking the vehicle in a large spa…
How to Disable the Start/Stop System in a Cupra Formentor
How to Disable the Start/Stop System in a Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) On the Cupra Formentor with touch infotainment, you can temporarily disable the Start/Stop from the central display. Turn on the system and go to the…
How to activate the heated seats mode in the Cupra Formentor
How to activate the heated seats mode in the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) Today we will explain how to activate the heated seats mode on a Cupra Formentor. To activate this mode, we must start the vehicle's instrument panel…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos