Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the coils of the Dacia Sandero

Model: Dacia Sandero MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Ignition coil

See other generations:
Video tutorial

In this video, we see a Dacia Sandero with an abnormal vibration, which can easily happen in engines with electronic injection: the reason can be found in the water deposit at the base of the coil, which causes vibrations and noise at idle. Replacing the coils is easy, we will need an 8mm socket wrench and a 16mm socket wrench to remove the spark plug.

We unscrew the coil retaining nut and then disconnect the electrical connector and then remove the spark plug and see that there is also moisture on the spark plug; this is due to the poor quality of the gasoline containing water. We must therefore change the spark plug and coil.

We can also check the others to see in what condition they are, but in this specific case the other three did not have any defects. We start the car which now no longer has any vibrations at the exhaust.


Posted on 10 February 2025 by ScegliAuto


Related tutorials

How to Change the Spark Plugs on a Dacia Sandero
How to Change the Spark Plugs on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Let’s see how to change the spark plugs on your Dacia Sandero: first, ensure the engine is cold; then disconnect the battery by removing the negative…
Removing Spark Plugs on Dacia Sandero
Removing Spark Plugs on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Remove the damaged spark plugs from the engine of a Dacia. Start by pulling the lever to open the engine compartment and lift the front bonnet, secur…
How to Change the Remote Battery of a Dacia Sandero
How to Change the Remote Battery of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) The tutorial here for changing the remote battery of a Dacia Sandero is also applicable to the Dacia Duster and all other cars with a similar remote …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos