Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the central tunnel cover of the Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Center console tunnel

See other generations:
Video tutorial

This short and simple guide will show us how to dismantle and replace the plastic cover of the central tunnel of the Dacia Duster. First of all, we get into the car and start unscrewing the small fixing screw we find inside the cup holders of the central tunnel; then we lever on the sides to detach the plastic cover of the central tunnel, as shown in the video.

At this point, we unhook the gear shift boot to remove the plastic cover, replacing it if necessary with the new one; we insert and properly fix the plastic cover of the central tunnel!


Posted on 7 July 2025 by ScegliAuto


Related tutorials

How to remove the rear seats of the Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) The video focuses on cleaning the upholstery of the rear seats in a Dacia Duster but also shows how to unclip them. It's quite simple: in the Dacia D…
Replacing the Cabin Air Filter on the Dacia Duster
Replacing the Cabin Air Filter on the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) On the air intake of the cabin ventilation system of the Dacia Duster, there is a filter that prevents dirt and dust from entering. To keep it effici…
Remove Gear Knob on Dacia Duster
Remove Gear Knob on Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Replace the knob mounted on the gear stick of a Dacia Duster. Enter the vehicle and start removing the knob above the centre tunnel. Take the knob in…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos