Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the door speakers of the Dacia Duster.

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Speaker

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and replace the front door speakers of the Dacia Duster. First, we open the front door of the car and start removing the plastic cover of the speaker; then we unscrew the fixing screws found on the sides of the speaker, disconnecting the electrical connector on the back to remove it, as shown in the video.

At this point, we replace and install the new door speaker, checking its operation before reassembling the external plastic cover.


Posted on 5 September 2025 by ScegliAuto


Related tutorials

How to replace the speakers of the Dacia Duster
How to replace the speakers of the Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Today we will explain how to replace the speakers of the Dacia Duster on your own. The speakers are located inside the front and rear door panels. To…
How do you replace the speakers in a Dacia Duster?
How do you replace the speakers in a Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) Replacing the speakers in a Dacia Duster is an operation that requires a bit of patience, but with the right instructions, it is within everyone's re…
How to Activate the Automatic Door Locking on a Dacia Duster
How to Activate the Automatic Door Locking on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Before you start, sit in the driver's seat of your Dacia Duster. Begin by starting the engine, turning the key in the ignition. Next, press and hold …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos