Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter in a Dacia Duster

Model: Dacia Duster HM, MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin air filter in a Dacia Duster, get inside the vehicle and position yourself on the passenger side. The filter is located behind the glove compartment in the lower side area.

Remove the cover panel and locate the cover of the cabin filter housing. Press the side tabs or unclip the cover to open the filter compartment.

Extract the old filter, taking care of the mounting direction, and clean the inside of any dirt residue. Then insert the new filter, respecting the airflow direction indicated by the arrows on the component.

Close the housing cover and reassemble the cover panel. Finally, check the proper functioning of the vehicle's internal ventilation.


Posted on 20 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter of the Dacia Duster?
How to Replace the Cabin Filter of the Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) To replace the cabin filter of the Dacia Duster, detach the carpet on the left side of the footwell on the passenger side. Once lowered, you will fin…
How to change the cabin filter of the Dacia Duster 1
How to change the cabin filter of the Dacia Duster 1
Dacia Duster (2010-2017 / MK 1, HS) In this video, we will see how to change the cabin air filter (also known as the pollen filter) on a Dacia Duster 1: the filter is located under the …
How do you replace the cabin filter of the Dacia Duster?
How do you replace the cabin filter of the Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) In order to replace the cabin filter of the Dacia Duster, you need to remove the panel located on the left side of the footwell next to the front pas…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos