Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Dacia Spring

Model: Dacia Spring MK 1 - Years 2021-2026
Part:

If the light comes on after changing the tyres, this is perfectly normal. Check that all four tyres are inflated to the correct pressure (usually there is a sticker with the values on the driver's side door frame). Without the correct pressure, the reset will not work. Turn on the ignition (without starting the engine, just press START without pressing the brake), then locate the button on the side of the steering column (usually it is the button at the bottom of the indicator stalk or the one to the left of the steering wheel). Press the button multiple times until the display shows "TPMS Reset" or "TPMS Reinitialisation". Hold the same button for about 3 seconds until the message starts flashing. At this point, the reset has begun. Start the engine and drive normally: the system will recalibrate itself while driving. After a few minutes of driving, the light will turn off permanently.

Posted on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Dacia Spring
How to Reset the Tyre Pressure Warning Light on a Dacia Spring
Dacia Spring (2021-2026 / MK 1) If the TPMS warning light appears on your Dacia Spring's instrument panel, even after inflating all the tyres to the correct pressure, don't worry. Y…
How to reset the tire pressure warning light on the Dacia Spring
How to reset the tire pressure warning light on the Dacia Spring
Dacia Spring (2021-2026 / MK 1) Let's see the main instructions that will allow us to reset the tire pressure monitoring system (TPMS) light of the Dacia Spring; before performing t…
How to Reset TPMS on the Dacia Spring?
How to Reset TPMS on the Dacia Spring?
Dacia Spring (2021-2026 / MK 1) To reset the low tyre pressure warning light, follow this procedure: First, measure the pressure of all tyres and, if necessary, restore the pressure…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos