Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Spring
    4. : To reset the tire pressure warning light on the Dacia Spring.

Dacia Spring - Video tutorial

Model: Dacia Spring MK 1 - Years 2021-2024
Part: Instrument cluster
Operation: To reset the tire pressure warning light on the Dacia Spring.

If the TPMS light appears on the instrument panel of your Dacia Spring even though you have already inflated all the tires to the correct pressure, don't worry because you can manually reset it in a few seconds using the following procedure. First, turn on the instrument panel and locate the button on the right side. Once found, press it several times until the display shows the "TPMS (Reset)" option. Finally, hold down the same button for a few seconds and wait for the reset of the respective light to complete. At this point, you can turn off the instrument panel or start driving.


Posted on 4 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Dacia Spring 2021-2028 - What are the warning lights on Dacia models? Read Answer
    • Dacia Spring 2021-2028 - Why does the AdBlue light stay on after refueling the Dacia Spring? Read Answer
    • Dacia Spring 2021-2028 - What do the warning lights on the Dacia Spring mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos