Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Brake pads

See other generations:
Video tutorial

Let's see how to replace the disc brake pads on a Dacia Duster. Lift the car on a column jack to the desired height, then remove the wheel (using a socket wrench) along with the respective pins.

Unscrew the locking bolt of the brake caliper and remove it from the wheel hub. Use a screwdriver to detach the pads from the caliper, remove the brake caliper, and then the disc (if it needs replacing). Install the new disc, the new pads onto the caliper, and reattach the brake caliper with the support onto the brake disc.

Tighten all the pins and reinstall the wheel.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Dacia Duster
How to Replace the Front Brake Pads on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Let’s see how to replace the front brake pads on a first-generation Dacia Duster, produced from 2010 to 2017. To start, lift the vehicle with a jack …
How to Replace the Front Brake Pads on a Dacia Duster?
How to Replace the Front Brake Pads on a Dacia Duster?
Dacia Duster (2010-2017 / MK 1, HS) This tutorial shows you how to replace the front brake pads on a Dacia Duster, a simple task that requires good manual skills. First, lift the front …
How to Replace the Front Brake Pads on a Dacia Duster
How to Replace the Front Brake Pads on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) In this tutorial, you will see how to replace the front brake pads on a Dacia Duster, a very simple operation. First, lift the side you will be worki…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos