Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wiper Blades on a Dacia Sandero

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Windshield wipers

See other generations:
Video tutorial

Replacing the wiper blades yourself can save you some time and money, so why not do it? If you own a Sandero, you might be limited by the apparent complexity of the old wiper locking system. Follow this short video and you will see that you can do it yourself without difficulty.

Look closely at the point where the blade attaches to the arm; you will find a lever, pull it up and slide the blade off in the direction of the arm, unhook it and slide it into the opposite position. Now all you need to do is purchase a new one of the correct size with the same attachment mechanism and replace it.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on the Dacia Sandero Stepway 2
How to Replace the Wiper Blades on the Dacia Sandero Stepway 2
Dacia Sandero (2012-2020 / B8) This video demonstrates how to remove and replace the front wiper blades on the Dacia Sandero Stepway second generation in simple steps. First, lift …
How to Replace the Wiper Blades on the Dacia Sandero?
Dacia Sandero (2021-2026 / MK 3) Remove and replace the wiper blades on the Dacia Sandero. The procedure is identical for the Dacia Duster and other similar cars. Start by turning on…
How to replace the windshield wiper brush of the Dacia Sandero
How to replace the windshield wiper brush of the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) In the following article, we will illustrate the procedure for replacing the windshield wiper blades of the Dacia Sandero. No tools are needed for th…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where do you pour windshield washer fluid in the Dacia Sandero? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos