Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to replace wipers on Dacia Sandero?

Dacia Sandero - Video tutorial

Model: Dacia Sandero MK 3 - Years 2021-2024
Part: Windscreen wipers
Operation: How to replace wipers on Dacia Sandero?

Let's see how to remove and replace the wiper blades on Dacia Sandero. The procedure is also identical for the Dacia Duster and other similar cars. Let's start by turning on the instrument panel and pulling the windscreen wiper stalk up twice. At this point the brushes will move up, away from the bonnet. We take an arm of the wiper, lift it and pull the tab by pressing on both sides and, in the meantime, pull up on the old blade to remove it. We take the new brush, place it in its housing and press to fit it. Let's make sure it's secure, put it back and then repeat the procedure on the other brush. Finally, we return the wiper stalk upwards to bring back the arms in their usual places.


Posted on 16 December 2022 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Sandero 2012-2020 - Where do you pour windshield washer fluid in the Dacia Sandero? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos