Do it yourself
Frequently asked questions about cars and motorcycles

How to activate the windshield wipers on the Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

See other generations:
Video tutorial

In this short guide, we will see the instructions that will allow us to activate the windshield wipers on the Dacia Sandero. First of all, we get on board the car and start the engine; the windshield wiper activation control can be found on the right lever of the steering wheel, lowering the selector to set the wiper speed, as shown in the video.

By raising the selector, we will activate the windshield wipers only once; by turning the selector, we will also activate the rear windshield wiper, setting its speed as well.


Posted on 25 June 2025 by ScegliAuto


Related tutorials

Dacia Sandero (2012-2020 / B8) Replacing the wiper blades on your Dacia Sandero is a task you can easily do at home by purchasing the wiper blades online or from a retailer. Once p…
Dacia Sandero (2008-2012 / BS) The following steps will allow us to disassemble and replace the front windshield wipers of the Dacia Sandero. First, let's move to the front of the …
Dacia Sandero (2012-2020 / B8) In this tutorial, you will learn how to set the time on a Dacia Sandero, a very simple and quick operation to perform, for example, after replacing t…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos