Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wiper Blades on Dacia Sandero 2

Model: Dacia Sandero B8 - Years 2012-2020
Part: Windshield wipers

Replacing the wiper blades on your Dacia Sandero is a task you can easily do at home by purchasing the wiper blades online or from a retailer. Once purchased, ensure the car is locked and the handbrake is engaged. Detach the old front wiper blades using a screwdriver, first lifting the tab above and then sliding them down. For the rear wiper, simply rotate it 45 degrees and slide it off its arm. To fit the new wiper blades, just reverse the process for all three, inserting the new attachment into the end of the arm and securing the tab.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to activate the windshield wipers on the Dacia Sandero
How to activate the windshield wipers on the Dacia Sandero
Dacia Sandero (2012-2020 / B8) In this short guide, we will see the instructions that will allow us to activate the windshield wipers on the Dacia Sandero. First of all, we get on …
Replacement of the front wipers of the Dacia Sandero
Replacement of the front wipers of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) These short and simple steps will allow us to disassemble and replace the front windshield wipers of the Dacia Sandero. First, let's move to the fron…
How to replace the front windshield wipers of the Dacia Sandero
How to replace the front windshield wipers of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) The following steps will allow us to disassemble and replace the front windshield wipers of the Dacia Sandero. First, let's move to the front of the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos