Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Gear Knob on Dacia Sandero - Duster - Renault Clio

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Shift knob

Today, you will see in this video tutorial how to remove the gear knob on various models from the Renault-Dacia group, such as the Sandero, Duster, Clio, and Captur. First, get inside the car and remove the gear gaiter by unfastening it from the sides; then pull it upwards and cut the securing tie. At this point, pull the gear knob upwards with force; if it does not come off, as a last resort, cut the knob to extract it. Finally, replace it with the new one, applying the reverse procedure for reassembly!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Dacia Duster - Renault Clio
How to Replace the Gear Knob on a Dacia Duster - Renault Clio
Dacia Duster (2010-2017 / HS, MK 1) .. as well as on the Sandero and the fourth series Renault Clio. First, get inside the vehicle and remove the cover where the gear markings are printed;.. …
How to Replace the Gear Knob on a Dacia Duster?
How to Replace the Gear Knob on a Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) To replace the gear knob on a Dacia Duster, grasp the lower part of the leather cover and unclip the fastening clips that hold it in place. Once the …
How to engage reverse gear on the Dacia Duster II?
How to engage reverse gear on the Dacia Duster II?
Dacia Duster (2017-2024 / HM, MK 2) .. On the Dacia Duster II (and most Renault/Dacia models with a 6-speed manual gearbox), engage reverse gear by lifting.. …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos