Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on the Dacia Sandero?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Windshield wipers

See other generations:
Video tutorial

To replace the rear wiper blade of the Dacia Sandero, lift the wiper arm connected to the motor. To remove the blade, lift the rubber, hold the blade with two fingers, and push with your thumb on the arm connected to the motor.

You will need to unclip the blade from its housing. The new blade should be inserted following the same procedure in reverse: simply clip the pin into the housing on the arm connected to the motor.

Once inserted, you can check its proper functioning.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper on a Dacia Sandero?
How to Replace the Rear Wiper on a Dacia Sandero?
Dacia Sandero (2008-2012 / BS) In this tutorial, see how to replace the rear wiper on a Dacia Sandero, a very simple and quick operation. First, ensure the wiper is in the rest pos…
How to Replace the Wipers on the Dacia Sandero StepWay
How to Replace the Wipers on the Dacia Sandero StepWay
Dacia Sandero (2012-2020 / B8) This video shows how to replace the wipers on the Dacia Sandero StepWay. The procedure is simple and takes little time to perform, and it does not re…
How to Replace the Wiper Blade on a Dacia Sandero 1
How to Replace the Wiper Blade on a Dacia Sandero 1
Dacia Sandero (2008-2012 / BS) In this video tutorial, see how to replace the wiper blade on a Dacia Sandero 1 by following some simple steps: first, purchase new wiper blades from…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where do you pour windshield washer fluid in the Dacia Sandero? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos