Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blade on a Dacia Sandero 1

Model: Dacia Sandero BS - Years 2008-2012
Part: Windshield wipers

In this video tutorial, see how to replace the wiper blade on a Dacia Sandero 1 by following some simple steps: first, purchase new wiper blades from an authorised dealer. Next, get in the vehicle, turn off the car, and pull the handbrake. Lift the wiper arm; to remove the blade, press the button and slide it out. Now take the new blade and install the adapter needed to fit the new blade. To insert the new blade, reverse the procedure used to remove the old one, and slide it along its guide; you will hear the click when it locks in place. Do the same to replace the other blade.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front windshield wipers of the Dacia Sandero
How to replace the front windshield wipers of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) The following steps will allow us to disassemble and replace the front windshield wipers of the Dacia Sandero. First, let's move to the front of the …
How to Replace the Rear Wiper Blade on the Dacia Sandero?
How to Replace the Rear Wiper Blade on the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To replace the rear wiper blade of the Dacia Sandero, lift the wiper arm connected to the motor. To remove the blade, lift the rubber, hold the blade…
How to replace the wipers of the Dacia Sandero StepWay
How to replace the wipers of the Dacia Sandero StepWay
Dacia Sandero (2012-2020 / B8) In this video, we are shown how to replace the wipers of the Dacia Sandero StepWay. The procedure is simple and requires little time to be carried ou…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos