Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Dacia Duster Key Card

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Key

This guide shows how to replace the battery of the Dacia Duster key card. First, open the back of the remote by sliding down the cover with the logo. Using a flathead screwdriver or the tip of the emergency key, lift the plastic cap that protects the battery. Remove it from the housing and replace it with a CR2032 button battery. Once the new battery is inserted, close the protective plastic cover and reassemble the plastic cover with the car manufacturer's logo. Check the proper functioning of the remote before departing.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery in the Dacia Duster
How to replace the battery in the Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) To independently and correctly replace the battery in your Dacia Duster, follow these steps. First, turn off the car and lift the bonnet to easily lo…
How to Replace the Battery of the Dacia Duster 1.6
How to Replace the Battery of the Dacia Duster 1.6
Dacia Duster (2010-2017 / HS, MK 1) Today's guide will show you the procedure and instructions to remove and replace the battery of the Dacia Duster 1.6. First, open the bonnet of your …
How to replace the battery of the Dacia Duster key
How to replace the battery of the Dacia Duster key
Dacia Duster (2010-2017 / HS, MK 1) To quickly and safely carry out the replacement of the small battery inside the key of your first series Dacia Duster, simply follow the steps descri…

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - What does the Dacia Duster wrench warning light indicate? Read answer
    • Duster 2010-2017 - Cost of duplicate Dacia car keys? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos