Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPSM on a Dacia Sandero 3

Model: Dacia Sandero MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Warning light – error code

See other generations:
Video tutorial

To reset the TPSM on a Dacia Sandero 3, first turn on the ignition. Then press the OK button followed by the menu button to open the menu.

Now scroll through the menu using the arrow keys until you find the tyre pressure option. Press and hold the up arrow button until the message flashes, then the "set launched" message will appear.

Wait until the reset is complete. For additional assurance, you can turn off and restart the ignition to check that everything has gone well and the vehicle no longer shows errors.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Dacia Sandero
How to Reset the Service Light on the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) Here’s how to reset the service light on the Dacia Sandero: turn on the ignition and navigate through the menu using the arrow buttons to scroll thro…
How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero. Start by turning the ignition key to start the engine. Next, select the "Set tp" op…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where to find the Dacia Sandero car radio code? Read answer
    • Sandero 2021-2028 - What does the error code DF003 mean in the Dacia Sandero? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos