Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight Bulb of the Dacia Sandero Mk3

Model: Dacia Sandero MK 3 - Years 2021-2026
Part: Headlight bulb

In today's video, you will see the steps to remove and replace the front headlight bulb of the third series Dacia Sandero, in simple and quick steps. First, open the bonnet of your car and start by removing the plastic protective cover of the bulbs, which is located at the back of the headlight; then disconnect the electrical connector and unclip the metal spring to remove the bulb, as shown in the video. At this point, replace it with a new one of the correct type (in this case, H7); insert it properly and reconnect the electrical connector!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Dacia Sandero?
How to Replace the Front Headlight Bulb of the Dacia Sandero?
Dacia Sandero (2008-2012 / BS) To replace the front headlight bulb of the Dacia Sandero, open the bonnet to access the engine compartment. Next, remove the cover cap from the insid…
How to Change the Headlight Bulb on the Dacia Sandero Stepway
How to Change the Headlight Bulb on the Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) This guide explains how to remove a front headlight bulb from a Dacia Sandero. First, open the bonnet from inside the vehicle using the lever located…
How to Replace the Front Headlight Bulb on Dacia Sandero Stepway?
How to Replace the Front Headlight Bulb on Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) To replace the front headlight bulb on the Dacia Sandero Stepway, open the bonnet to access the engine compartment. Next, remove the protective cap f…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos