Do it yourself
| ||||
|
Dacia Sandero - Video tutorial
Model: Dacia Sandero
B8
- Years 2012-2020 In order to reset the Dacia Sandero Service warning light there is no procedure that can be carried out simply by accessing the car menu. It will be necessary to connect a diagnostic tool to the vehicle's OBD port: the latter is positioned at the bottom left of the steering column, behind the special plastic cover. Once identified, it will be necessary to connect the instrument to the port and follow the instructions for the reset that are reported in the tutorial. Once the reset has been carried out, you will be able to disconnect the scanner and turn off the ignition.
Posted on 28 August 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |