Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Dokker
    4. : How to reset the maintenance warning light on the Dacia Dokker

Dacia Dokker - Video tutorial

Model: Dacia Dokker MK 1 - Years 2013-2023
Part: Instrument cluster
Operation: How to reset the maintenance warning light on the Dacia Dokker

If on the instrument panel you notice the maintenance warning light coming on steadily (with a small wrench shown above) and you want to reset it manually, all you have to do is put these simple steps into practice. First insert the key and start the ignition. Immediately afterwards, press the button at the end of the right steering wheel lever several times until the maintenance warning light appears on the mini display. Finally, hold down the same button you used just before and release it when the reset is complete. Finally, turn off the ignition and the procedure is completed successfully.


Posted on 27 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Dokker 2013-2023 - What spies does the Dacia Dokker have? Read Answer
    • Dokker 2013-2023 - What are the warning lights on the Dacia Dokker? Read Answer
    • Dokker 2013-2023 - What does the tire warning light indicate on the Dacia Dokker? Read Answer
    • Dokker 2013-2023 - Dacia Dokker multifunction warning light Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos