Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Duster
    4. : How to replace front bulbs on Dacia Duster

Dacia Duster - Video tutorial

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Light bulb
Operation: How to replace front bulbs on Dacia Duster

In today's video we see how to replace the front bulb of the second series of the Dacia Duster (ie the current one), equipped with halogen lights. First we proceed by opening the front hood. Let's equip ourselves with a bulb of the same type, which can be purchased online or in physical stores. We identify the intervention area and proceed with the replacement of the piece. We disconnect the power connector after removing the cover. Once this is done we can test the light bulb. If it works correctly we can finish our work and reassemble everything following the previous steps.


Posted on 5 December 2022 by ScegliAuto



How to replace the front headlight bulbs of the Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) In the video presented here, we can see how the author replaces the front headlight bulbs (H7 and H1) in a first-generation Dacia Duster. The YouTube
How to replace the bulbs on the Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Let's see how to replace the headlight bulbs of the Dacia Duster. We open the front hood by pulling the lever located at the bottom right of the dash
How to replace headlight bulbs on Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Let's see how to remove the headlight bulbs on a Dacia Duster: open the front hood by pulling the lever located at the bottom right of the dashboard,

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos