Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Rear Light Bulb on a Dacia Duster

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Tail light bulb

Switch off the car and pull the handbrake. Open the boot and remove the entire light block. Open the hatch and find the plastic tabs that secure the light and unscrew them counterclockwise. Gently lift the light horizontally to remove it; then, disconnect the power connector (to do this, push on the small plastic tab while pulling on the terminal). Remove the bulb support plate by moving the tabs from the support. Push the bulb and turn it a quarter turn. Take the new bulbs and reinstall them by reversing the procedure.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing LED Lights on the Dacia Duster
Installing LED Lights on the Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) In this video, see how to install LED bulbs on the Dacia Duster. Once the headlamp is removed (it is easier to work this way than directly on the car…
How to Replace the Front Headlamp Bulb on a Dacia Duster
How to Replace the Front Headlamp Bulb on a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Learn how to replace the front headlamp bulbs on a Dacia Duster. Open the bonnet (by pulling the lever located at the bottom right of the dashboard) …
How to replace the front headlight bulb of the Dacia Duster
How to replace the front headlight bulb of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Replacing the front headlight bulb of the Dacia Duster model 2 can be done independently. Let's start by opening the front hood and proceed with remo…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos