Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Manually Reset the Maintenance Light of the Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Warning light – error code

If you want to manually reset the maintenance light of your first-generation Dacia Sandero (2008-2012), just follow these simple steps. First, go inside the vehicle, insert the key, and turn on the ignition. Next, scroll through the onboard menu by pressing the appropriate button located at the end of the right steering lever multiple times. Locate the option with a small spanner icon, then press and hold the same button until the reset of the light is successfully completed.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light of the Dacia Sandero
How to reset the service light of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) Below you will find the description of all the various steps you need to follow if you want to manually reset the service light of your Dacia Sandero…
How to reset the service light on the 2019 Dacia Sandero
How to reset the service light on the 2019 Dacia Sandero
Dacia Sandero (2012-2020 / B8) Today we will show you how to reset your 2019 Dacia Sandero in less than a minute. To perform the reset of the service light related to the car servi…
Resetting the service light on the Dacia Sandero
Resetting the service light on the Dacia Sandero
Dacia Sandero (2012-2020 / B8) Today's guide will show you how to reset the service light for the routine maintenance oil change on the Dacia Sandero. First, get into the vehicle a…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where to find the Dacia Sandero car radio code? Read answer
    • Sandero 2021-2028 - What does the error code DF003 mean in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - What is the authentication code of the Dacia Sandero Stepway for? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos