Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dacia
  4. :
  5. Dokker
  6. : A small change on the Dacia Dokker daytime running lights

Dacia Dokker - Video tutorial

Model: Dacia Dokker MK 1 - Years 2013-2023
Part: Headlight
Operation: A small change on the Dacia Dokker daytime running lights

In order to fit commercial bulbs on the Dacia Dokker instead of the originals, we need to make a small modification. Extract the bulb holder from the headlight and release the cables from the protective sheath: we will notice that the two wires are of different colours. With suitable scissors, cut the two wires, strip the ends, seal them and insert two tubes of heat-shrinking sheath into the wires. We weld the two ends by inverting the colors, we position the two tubes, which we will heat with a lighter so as to restore the insulation. Insert the new bulb, replace the bulb holder in the headlight and repeat the operation with the other headlight.


Posted on 16 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos