Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on a Dacia Duster

Model: Dacia Duster HM, MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: AdBlue warning light

See other generations:
Video tutorial

In this brief and simple guide, follow these instructions to top up the AdBlue fluid and reset the warning light on a Dacia Duster. First, open the fuel flap and unscrew the AdBlue cap. When the warning light comes on, you will need to top up with approximately 2-3 litres of fluid, as shown in the video.

Next, get in the vehicle and turn on the ignition; the AdBlue warning light should reset automatically, allowing for a range of about 1,500 miles before the next top-up!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Deactivate the AdBlue Warning Light on the Dacia Duster - Sandero
How to Deactivate the AdBlue Warning Light on the Dacia Duster - Sandero
Dacia Duster (2017-2024 / HM, MK 2) Today's guide will show you the steps to reset the AdBlue warning light on the Dacia Duster, as well as the Sandero. First, top up the AdBlue fluid b…
How to reset the AdBlue warning light on the Dacia Duster?
How to reset the AdBlue warning light on the Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) To reset the AdBlue warning light on the Dacia Duster, open the fuel filler flap, located at the rear right of the vehicle: beneath this flap, you wi…
How to Turn Off the AdBlue Warning Light in a Dacia Duster
How to Turn Off the AdBlue Warning Light in a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) This video shows how to turn off the AdBlue warning light in a Dacia Duster. First, refuel the AdBlue. In the Dacia Duster, the AdBlue filler is loca…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos