|
Do it yourself
| |||
| ||||
How to Start a Dacia Duster Without AdBlue in an Emergency
Model: Dacia Duster
HM, MK 2
- Years:
2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Video tutorial
The procedure described in the video is an extreme emergency measure that may cause damage to the vehicle. However, if you find yourself on the road with family and don’t know how to reach the nearest fuel station, you must find a way to manage (but we should have thought of this earlier!). When the AdBlue runs out, our Dacia Duster enters protection mode, and if we are driving, the engine power is drastically limited until the car shuts down and cannot be restarted. The YouTuber disables the start & stop system and then starts the car by pushing it (in second gear, with the key in the ON position, releasing the clutch sharply while the car is moving). This tricks the ECU and starts the engine mechanically, bypassing the electronic lock. The risk is that the engine, running without AdBlue, will cause a spike in NOx emissions, damaging the catalytic converter and the particulate filter; furthermore, even if the car starts, it is highly likely that the ECU will soon limit the revs and power again.
Posted on 16 April 2026 by ScegliAuto
Related tutorials
Dacia Duster
(2010-2017 /
MK 1, HS)
This video shows how to turn off the AdBlue warning light in a Dacia Duster. First, refuel the AdBlue. In the Dacia Duster, the AdBlue filler is loca…
Dacia Duster
(2017-2024 /
HM, MK 2)
In this brief and simple guide, follow these instructions to top up the AdBlue fluid and reset the warning light on a Dacia Duster. First, open the f…
Dacia Duster
(2017-2024 /
HM, MK 2)
In this video tutorial, you will see how to reset the AdBlue warning light on a Dacia Duster by following a few simple steps. Usually, the AdBlue lig…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.117
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |