Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the clutch and gearbox on a Dacia Logan

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Clutch

On a Dacia Logan, to replace the clutch and gearbox, first remove the gearbox assembly. Focus on the clutch first, then align the gearbox with the engine, being careful not to force anything. The clutch on the Dacia Logan is positioned on the engine, preparing the mounting surface first, then placing the clutch disc and pressure plate. Tighten the screws gradually and evenly to ensure the clutch settles correctly without pulling to one side. Proper centring of the clutch disc is crucial, as it affects the ability to refit the gearbox without difficulty. Once the clutch is installed, bring the gearbox close to the engine and align it carefully. The video clearly shows the gearbox being guided into position without using bolts to force it in, but rather seeking the correct alignment until it fits with the engine. Only when the gearbox is in place should you proceed with the final fastening.

Posted on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the gear knob of the Dacia Logan.
How to change the gear knob of the Dacia Logan.
Dacia Logan (2004-2012 / MK 1) To change the gear knob of your first series Dacia Logan, you just need to follow the procedure described in this new guide. The entire operation tak…
How to replace the gear knob of the Dacia Logan
How to replace the gear knob of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) In the following guide, we will help you complete the replacement of the gear knob located inside the cabin of your Dacia Logan. First of all, make s…
Where is the fuse for the heating fan of the Dacia Logan located?
Where is the fuse for the heating fan of the Dacia Logan located?
Dacia Logan (2004-2012 / MK 1) The fuse related to the heating fan of the Dacia Logan model 1 is located inside the fuse box in the interior of the vehicle, specifically behind the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos