Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pedal Pump on a Dacia Dokker

Model: Dacia Dokker MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Clutch

Video tutorial

To replace the clutch pedal pump on a Dacia Dokker, open the bonnet and access the engine bay. The pump will be located at the lower rear of the engine bay: by loosening the appropriate fixing screws and disconnecting all connectors, the part can be removed.

Before you can work on it, you will need to remove several obstructing parts.

After the old pump is removed, you can install a new one and press the pedal a few times. After installation, reassemble all the obstructing parts that were removed.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to replace the washer pump in the Dacia Dokker?
How to replace the washer pump in the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) In this tutorial, you will see how to replace the washer pump in the Dacia Dokker, a very simple and quick task. First, ensure the key is not inserte…
How to Reset the "Service" Light on a Dacia Dokker
How to Reset the "Service" Light on a Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) Before you begin, sit in the driver's seat of your Dacia Dokker. Start by putting the vehicle in neutral, then activate the instrument panel without …
How to Reset the Service Light on a Dacia Dokker
How to Reset the Service Light on a Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) This video demonstrates how to reset the service light on a Dacia Dokker. Position yourself in the driver's seat and put the gear in neutral. Turn on…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos