Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the washer pump in the Dacia Dokker?

Model: Dacia Dokker MK 1 - Years 2013-2024
Part: Pump

In this tutorial, you will see how to replace the washer pump in the Dacia Dokker, a very simple and quick task. First, ensure the key is not inserted, then open the bonnet and remove the entire plastic cover located in front of the windscreen. Next, locate the fluid reservoir on the passenger side, disconnect the relevant hoses and unscrew the fastening bolts. At this point, you can free the old pump, insert the replacement, and reassemble everything by following the reverse procedure. Finally, refill any fluid lost during the operation.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Dacia Dokker
How to replace the cabin air filter of the Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) In the following guide, we will help you complete the replacement of the cabin air filter of your Dacia Dokker correctly and safely. First, purchase …
Where is the fuse box of the Dacia Dokker located?
Where is the fuse box of the Dacia Dokker located?
Dacia Dokker (2013-2024 / MK 1) In order to locate the box containing all the fuses of your Dacia Dokker, you need to access the engine compartment, which must be cold for safety re…
How do you reset the AdBlue light on the Dacia Dokker?
How do you reset the AdBlue light on the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) In order to reset the AdBlue warning light on the Dacia Dokker, you must add the necessary amount of additional fluid to the tank: to top up, you mus…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos