Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Dokker
    4. : How do you replace the fuel pump on the Renault Dokker?

Dacia Dokker - Video tutorial

Model: Dacia Dokker MK 1 - Years 2013-2023
Part: Fuel pump
Operation: How do you replace the fuel pump on the Renault Dokker?

To be able to replace the fuel pump on your Renault Dokker, you need to lift the vehicle with a lift, so that you can locate the bolts that secure the tank to the underside of the vehicle. When the bolts have been loosened, the pipes disconnected and also the connectors, the tank can be detached, locating the pump in its upper part. The latter can be removed by disconnecting the pipes and unscrewing the fixing screws, extracting the pump from its housing and replacing it with a new spare part; after the replacement, all the previously removed components can be mounted.


Posted on 19 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Dokker 2013-2023 - Where is the inertia switch of the Dacia Dokker located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos